Repair Services - All repairs are guaranteed for 60 days from date of delivery. We will provide a 60 day warranty on the repaired portion of your eyewear. The warranty will protect you against any breakage happening at the same spot that we repaired.
How to Read Your Eyeglass Prescription
An eyeglass prescription is a written order by an ophthalmologist or an optometrist to an optician for eyeglasses. It specifies the parameters to which the eyeglasses are to be made in order to correct blurred vision due to refractive errors, including myopia, hyperopia, astigmatism, and presbyopia. It is typically determined using a phoropter or an automated refractor.
Run your mouse over the below prescription form, to find out what all of those numbers and abbreviations mean.
What is OD and OS?
The first step to understanding your eyeglass prescription is knowing what "OD" and OS" mean. They are abbreviations for oculus dexter and oculus sinister, which are Latin terms for right eye and left eye.
Your eyeglass prescription also may have a column labeled "OU." This is the abbreviation for the Latin term oculus uterque, which means "both eyes."
Though the use of these abbreviated Latin terms is traditional for prescriptions written for eyeglasses, contact lenses and eye medicines, some doctors and clinics have opted to modernize their prescriptions and use RE (right eye) and LE (left eye) instead of OD and OS.
You may have noticed that on your prescription form the information for the right eye (OD) comes before the information for the left eye (OS). Eye doctors write prescriptions this way to avoid making errors, because when they face you, they see your right eye at left (first) and your left eye at right (second).
Other Terms on Your Eyeglass Prescription
Your eyeglass prescription contains other terms and abbreviations as well.
Sphere (SPH). This indicates the amount of lens power, measured
in diopters (D), prescribed to correct nearsightedness or
farsightedness. If the number appearing under this heading has a minus sign (–),
you are nearsighted; if the number has a plus sign (+) or is not preceded by a
plus sign or a minus sign, you are farsighted.
The term "sphere" means that the correction for nearsightedness or
farsightedness is "spherical," or equal in all meridians of the eye.
Cylinder (CYL). This indicates the amount of lens power for
astigmatism. If nothing appears in this column, you have no astigmatism.
The term "cylinder" means that this lens power added to correct astigmatism
is not spherical, but instead is shaped so one meridian has no added curvature,
and the meridian perpendicular to this "no added power" meridian contains the
maximum power and lens curvature to correct astigmatism.
The number in the cylinder column may be preceded with a minus sign (for the
correction of nearsighted astigmatism) or a plus sign (for farsighted
astigmatism). Cylinder power always follows sphere power in an eyeglass
Meridians of the eye are determined by superimposing a protractor
scale on the eye's front surface. The 90-degree meridian is the vertical
meridian of the eye, and the 180-degree meridian is the horizontal
Axis. This describes the lens meridian that contains no cylinder power
to correct astigmatism. The axis is defined with a number from 1 to 180. The
number 90 corresponds to the vertical meridian of the eye, and the number 180
corresponds to the horizontal meridian.
If an eyeglass prescription includes cylinder power, it also must include an
axis value, which follows the cyl power and is preceded by an "x" when written
The axis is the lens meridian that is 90 degrees away from the meridian that
contains the cylinder power.
Add. This is the added magnifying power applied to the bottom part of
multifocal lenses to correct presbyopia. The number appearing in this
section of the prescription is always a "plus" power, even if it is not preceded
by a plus sign. Generally it will range from +0.75 to +3.00 D and will be the
same power for both eyes.
Prism. This is the amount of prismatic power, measured in prism
diopters ("p.d." or a superscript triangle when written freehand), prescribed to
compensate for eye alignment problems. Only a small percentage of eyeglass
prescriptions include prism.
When present, the amount of prism is indicated in either metric or fractional
English units (0.5 or ½, for example), and the direction of the prism is
indicated by noting the relative position of its "base" or thickest edge. Four
abbreviations are used for prism direction: BU = base up; BD = base down; BI =
base in (toward the wearer's nose); BO = base out (toward the wearer's ear).
Sphere power, cylinder power and add power always appear in diopters. They
are in decimal form and generally are written in quarter-diopter (0.25 D)
increments. Axis values are whole numbers from 1 to 180 and signify only a
meridional location, not a power. When prism diopters are indicated in decimal
form, typically only one digit appears after the period (e.g.,
Blur is the subjective experience or perception of a defocus aberration within the
eye. Blur may appear differently depending on the amount and type of refractive error. The following are some examples of
blurred images that may result from refractive errors:
Blur is corrected by focusing light on the retina. This may be done with
eyeglasses or contact lenses, or by altering the
shape of various eye structure via refractive surgery or special
Eyeglasses sometimes have unwanted effects including magnification or
minification, distortion, color fringes, altered depth perception, etc. Although
many people think of lenses as magnifiers, the lenses within eyeglasses improve
vision primarily by reducing blur. Depending on the optical setup, they may also
produce magnfication or minification of images which may or may not be
intentional or desirable.
The values indicated in the "sphere" and "cylinder" columns of an eyeglass
prescription specify the optical power of the lenses in diopters, abbreviated D. The higher the
number of diopters, the more the lens refracts or bends light. A diopter is the
reciprocal of the focal length in meters. If a lens has a focal length of 1/3
meters, it is a 3 diopter lens.
A +10 diopter lens, which has a focal length of 10 centimeters, would make a
good magnifying glass. Eyeglass lenses are usually much weaker, because
eyeglasses do not work by magnifying; they work by correcting focus. The eye
itself has a refractive power of 60 diopters.
Stacking lenses combines their strength. A +1 diopter lens combined with a +2
diopter lens forms a +3 diopter system.
Lenses come in positive (plus) and negative (minus) powers. Given that a
positive power lens will magnify an object and a negative power lens will minify
it, it is often possible to tell whether a lens is positive or negative by looking through it.
Positive eyeglass lenses can concentrate sunlight.
This series of pictures shows the shadow cast by a pair of 1 diopter
drugstore "reading glasses" outdoors in sunlight as we hold it farther and
farther away from a wall. As the distance from the wall increases, the shadow of
the frame seems to thicken and the bright area in the center gets smaller and
brighter. It slowly changes from being "eyeglass-shaped" to circular.
Negative lenses spread sunlight instead of concentrating it.
A negative lens combined with a positive lens removes some of its strength. A
-2 lens combined with a +5 lens forms a +3 diopter system.
A -3 lens stacked on top of a +3 lens looks almost like flat glass, because
the combined strength is 0.
In science textbooks, positive lenses are usually diagrammed as convex on
both sides; negative lenses are usually diagrammed as concave on both sides. In
a real optical system, you usually get the best optical quality when most rays
of light are roughly normal to the lens surface. In the case of an eyeglass
lens, this means that the lens should be roughly shaped like a cup with the
hollow side toward the eye. So most eyeglass lenses are meniscus in shape.
Spherical lenses and spherical correction
the "spherical" component is the main correction
the "cylindrical" component is "fine tuning."
Depending on the optical setup, lenses can act as magnifiers, lenses can
introduce blur, and lenses can correct blur.
Whatever the setup, spherical lenses act equally in all meridians: they
magnify, introduce blur, or correct blur the same amount in every direction.
An ordinary magnifying glass is a kind of spherical lens. When a spherical
lens acts as a magnifier, it magnifies equally in all meridians. Here, note that
the magnified letters are magnified both in height and in width.
Similarly, when a spherical lens puts an optical system out of focus and
introduces blur, it blurs equally in all meridians:
Here is how this kind of blur looks when viewing an eye chart. This kind of
blur involves no astigmatism at all; it is equally
blurred in all meridians.
Amount of refractive error and degree of blur
The leftmost image above shows a Snellen eye chart as it might be
seen by a person who needs no correction, or by a person who is wearing
eyeglasses or contacts that properly correct any refractive errors he or she may
The images labelled 1D, 2D, and 3D give a very rough impression of the degree
of blur that might be seen by someone who has one, two, or three diopters of
refractive error. For example, a nearsighted person who needs a -2.0 diopter
corrective lens will see something like the 2D image when viewing a standard eye
chart at the standard 20-foot distance without glasses.
A very rough rule of thumb is that there is a loss of about one line on an
eye chart for each additional 0.25 to 0.5 diopters of refractive error.
The top letter on many eye charts represents 20/200 vision. Many people
cannot read even this top letter without glasses. The definition of legal
blindness is not based on vision without glasses. The U. S. Social Security
administration, for example, states that "we consider you to be legally blind if
your vision cannot be corrected to better than 20/200 in your better eye." In
other words, what matters in evaluating legal blindness, and for many other
purposes, is corrected acuity—which line of the chart can be read with proper
lenses. One purpose in which uncorrected vision makes a difference is for
receiving a driver's licence that is good without lenses; a person who needs
lenses may receive one that requires them to wear the said lenses.
Cylindrical lenses and cylindrical correction
Some kinds of magnifying glasses, made specifically for reading wide columns
of print, are cylindrical lenses. When a cylindrical lens acts as a magnifier,
it magnifies only in one direction. For example, the magnifier shown magnifies
letters only in height, not in width.
Similarly when a cylindrical lens puts an optical system out of focus and
introduces blur, it blurs only in one direction.
This is the kind of blur that results from uncorrected astigmatism.
The letters are smeared out directionally, as if an artist had rubbed his or her
thumb across a charcoal drawing. A cylindrical lens of the right strength can
correct this kind of blur. When viewing an eye chart, this is how this kind of
blur might appear:
Compare it to the kind of blur that is equally blurred in all directions.
When an eye doctor measures an eye—a procedure known as
refraction—usually he or she begins by finding the best spherical
correction. If there is astigmatism, the next step is to remove it by adding the
right amount of cylindrical correction.
Spherical lenses just have a strength, such as +1.0D, or -2.5D.
Astigmatism, however, causes a directional blur. Here are two examples
of the kind of blur you get from astigmatism. The letters are smeared out
directionally, as if an artist had rubbed his or her thumb across a charcoal
A cylindrical lens of the right strength can correct this kind of blur. The
second example is a little bit more blurred, and needs a stronger cylindrical
But notice that in addition to being smeared more, the second example is
smeared out in a different direction.
A spherical lens is the same in all directions; you can turn it around, and
it doesn't change the way it magnifies, or the way it blurs:
A cylindrical lens has both a strength and an axis. Turning it around
so that the axis points in different directions changes the way it magnifies,
and the way it blurs.
The axis specification on a prescription gives the orientation of
the axis of the cylindrical correction, and it can vary from 1 to 180
The total power of a cylindrical lens varies from zero along its main axis to
its maximal value along the axis 90 degrees away. The total power of a lens with
a spherical and cylindrical correction changes accordingly: along the axis
specified on the prescription it is equal to the value listed under "spherical",
and it reaches the sum of "spherical" and "cylindrical" along the axis perpendicular to the one listed on
Distant vision and near vision
The DV portion of the prescription describes the corrections for
distant vision. For most people under forty years of age, this is
the only part of the prescription that is filled in. The NV or near-vision
portion of the prescription is blank because a separate correction for near
vision is not needed.
The NV portion is used in prescriptions for bifocals.
In younger people, the lens of the eye is still flexible enough to
accommodate over a wide range of distances. With age, the lens hardens and
becomes less and less able to accommodate.
This is called "presbyopia;" the "presby-" root means
"old" or "elder." (It is the same root as in the words "priest" and "presbyterian".)
The hardening of the lens is a continuous process, not something that
suddenly happens in middle age. It is occurring all along. All that happens
around middle age is that the process progresses to the point where it starts to
interfere with reading. Therefore almost everybody needs glasses for reading
from the age of 40-45.
Because young children have a wider range of accommodation than adults, they
sometimes examine objects by holding them much closer to the eye than an adult
This chart (which is approximate) shows that a schoolchild has over
ten diopters of accommodation, while a fifty-year-old has only two. This means
that a schoolchild is able to focus on an object about 10 cm. (4") from the eye,
a task for which an adult needs a magnifying glass with a rated power of about
The NV correction due to presbyopia can be predicted using the parameter age
only. The accuracy of such a prediction is sufficient in many practical cases,
especially when the total correction is less than 3 diopters. See also the
following calculator for computing this correction.
Variations in prescription writing
There is a surprising amount of variation in the way prescriptions are
written; the layout and terminology used is not uniform.
When no correction is needed, the spherical power will sometimes be written
as "0.00" and sometimes as "Plano" or "Pl" because the lens, although not flat,
is optically equivalent to a flat piece of glass.
When cylindrical correction is needed, the mathematics and optics of the way
lenses combine mean that there are two different ways to write the same
correction. One is called the plus-cylinder form and the other the
minus-cylinder form. These two prescriptions are equivalent:
Both of them specify a power of 2.00 diopters at the 90 degree axis and 3.00
diopters at the 180 degree axis.
The first one specifies a 2.00 spherical component, which, by itself, would
give a power of 2.00 diopters along both the 180 and 90 degree axis, and adds a
1.00 cylindrical component at 180 degrees (perpendicular to the axis listed on
the prescription, as explained under Axis). The result is 2.00
diopters at 90 degrees and 2.00 + 1.00 = 3.00 diopters at 180 degrees.
The second specifies a 3.00 spherical component, which by itself would give a
power of 3.00 diopters along both the 180 and 90 degree axis, and subtracts a
1.00 cylindrical component at 90 degrees. The result is 3.00 - 1.00 = 2.00
diopters at 90 degrees and 3.00 diopters at 180 degrees.
OpticsFast.com are the specialists in the repair of any eyewear.
It does not matter what brand, model or style, our company can fix it. The repair work is performed by our highly skilled lab technicians who have many years of experience repairing broken eyewear.