Screw In or Screw On
Screw in nose pads are mounted on an eyeglasses frame by using a tiny nose pad screw. When it's possible we will use the same type of screw that came with your frames from the manufacturer. Since there are many simular types, we will do our best to match perfectly if one can not be gotten from them
Two screws that may look simular will very easily differ due to the types of threading or diameter. Our experts are knowledgeable to make certain that they do not break the thread and destroy the foundation.
Snap In , Push On or Slide In
Snap In , Push On or Slide In eyewear nose pads and eyeglasses nose pieces are definatley the most easiest to work with. They are a slight finger press away from keeping the nosepad in place. Once again these little items differ in size and its best to use only the one provided by the manufacturer for a perfect fit and stable nose pad placement. THe frame mount is very important because it will hold that specific pin and control the nosepad movement of the nose pad mounting arm.
Stick In or Stick On
The stick on nosepad is different from the rest because it does not require any kind of frame mounting hardware. It simply uses an adhesive.
Adhesive nosepads peel off from a waxy material and they may be applied to most surfaces on any eyeglass frame.
Adhesive nosepads for glasses and eyeglasses are normally available in a foam material and silicone.